The S-meter is an instrument on most radio receivers that measures the strength of the signal being received. It uses a unit: the S-point. HF radios usually have a needle scale, whereas other bands often have LEDs displaying the S-Points.
S-Points is the common method of measuring signal strength between operators, however many programs like WSJTX use dB. So how do you convert between dB and S?
S-points go from S1 to S9, and each S-point is defined as a 6 dB change in signal strength. Therefore, each time the voltage is halved (–6 dB) the signal strength decreases by one point. S9 is already a very strong signal, but to describe larger signals, steps of 10 dB are used instead of 6 dB, noted “S9+20” meaning 20 dB above S9.
S-points for frequencies below 30 MHz
| Signal strength | Relative intensity |
| S1 | –48 dB |
| S2 | –42 dB |
| S3 | –36 dB |
| S4 | –30 dB |
| S5 | –24 dB |
| S6 | –18 dB |
| S7 | –12 dB |
| S8 | –6 dB |
| S9 | 0 dB |
| S9+10 | 10 dB |
| S9+20 | 20 dB |
| S9+30 | 30 dB |
| S9+40 | 40 dB |
| S9+50 | 50 dB |
| S9+60 | 60 dB |
S-points for frequencies above 30 MHz:
| Signal strength | Relative intensity |
| S1 | –48 dB |
| S2 | –42 dB |
| S3 | –36 dB |
| S4 | –30 dB |
| S5 | –24 dB |
| S6 | –18 dB |
| S7 | –12 dB |
| S8 | –6 dB |
| S9 | 0 dB |
| S9+10 | 10 dB |
| S9+20 | 20 dB |
| S9+30 | 30 dB |
| S9+40 | 40 dB |
| S9+50 | 50 dB |
| S9+60 | 60 dB |
Hopefully, this helps answer the question how to convert a dB signal strength to a S1 to S9 signal strength.
If you enjoyed this read, there are some others below you may enjoy. Please put your email address in the subscribe area if you want to keep updated with all the updates.
- InterferenceInterference in Amateur Radio refers to unwanted signals that disrupt radio communication. This interference can reduce signal clarity, make contacts difficult, or completely block communication between amateur radio operators. Radio…
- 6m and TV Channel 0
Prior to 1989, it was illegal to operate between 50 MHz and 52 MHz in Australia. It was a real pain as that was where all the action was when… - Dipole Antennas Vs Long Wire Antennas
I’ve heard a lot about dipole antennas, and I’ve heard a lot about long wire antennas also. I would say I’ve seen more dipoles than long wire antennas. So why… - Repeater-START
Repeater-START is a multi-platform app designed for ham radio and radio-operator enthusiasts who need fast access to repeater information. The app provides a detailed repeater map as well as a… - The 6-Meter Amateur Radio Band
What Is the 6m Band? The 6-meter band, spanning roughly 50–54 MHz, is a section of the VHF spectrum assigned to amateur radio operators. Its wavelength is six meters, and… - Anytone AT-778UV
Overview The Anytone AT-778UV is a dual-band VHF/UHF mobile transceiver designed for amateur radio operators. It operates on the 136–174 MHz (VHF) and 400–490 MHz (UHF) bands, offering reliable two-way… - 160 Meters Band160 meters band is known as the “Gentlemen’s band”. It is right next to the AM commercial band, known as medium wave. The 160-meter band is the radio frequencies between…
- What does this Antenna do?
Have you ever had an antenna and forgotten what it is for? Maybe you have been given one and wasn’t told exactly what it was used for. I got given…
VK3TBS 